Endress+Hauser Cerabar T PMC131 - Pmp135

Cerabar T
14 Endress+Hauser
P01-PMP131xx-06-09-xx-xx-002
Process connection PMP131; Material AISI 304 (1.4301)
1 Version B: Thread ISO 228 G ½, Gasket DIN 3852-A flush-mounted
2 Dimensions for tapped hole G ½ as per DIN 3852-11 form X
→ See respective housing for installation height H
PMP135 Process connections
P01-PMP135xx-06-xx-xx-xx-001
Process connections PMP135; Material AISI 316L (1.4435); Surface roughness of the surfaces in contact with the medium
Ra ≤ 0.8 μm
M = Diaphragm diameter 17.2 mm
1 Version F: Clamp ¾" (ISO 2852) or DN 22 (DIN 32676), 3A
2 Version G: Tri-Clamp 1" to 1½" (ISO 2852) or DN 25 to DN 40 (DIN 32676), 3A
3 Version H: Tri-Clamp 2" (ISO 2852) or DN 50 (DIN 32676), 3A
4 Version S: SMS 1½" PN 25, 3A
5 Version N : G1A (ISO 228), with sealing surface for flush-mounted installation
6 Version M: G1A (ISO 228), with metallic sealing taper, flush-mounted
→ See respective housing for installation height H
27
(1.1)
14
(0.5)
2.5
(0.1)
22
(0.9)
G ½
H
1
2
mm (inch)
14
(0.5)
G ½
ø26
(1)
17
(0.7)
ø29
G1A
29.5
46.6
ø55
33
H
33
33
33
ø27.5
ø34
MM
M
M
M
ø50.5
ø43.5
ø64
ø56.5
H H
H
H
1
2 3
4 5
H
G1A
27
39
M
6