Endress+Hauser Cerabar T PMC131 - Weights; Material; Operating Elements

Cerabar T
Endress+Hauser 15
Weights • PMC131: approx. 0.32 kg
• PMP131: approx. 0.24 kg
• PMP135: approx. 0.34 kg
Material • Process connection:
– PMC131: AISI 304 (1.4301)
– PMP131: AISI 304 (1.4301)
– PMP135: AISI 316L (1.4435)
• Sensor diaphragm:
– PMC131: Ceraphire
®
(99.9 % Al
2
O
3
), FDA number 21-CFR 186.1256
– PMP131, PMP135: AISI 316L (1.4435)
• Fill oil:
– PMP131: Tegiloxan 3
– PMP135: Mineral oil, FDA number 21-CFR 172.882
• Housing
AISI 304 (1.4301)
• Electrical connection
Plug M12: Polyamide (PA)
Valve connector: Sheathing made of polyamide (PA)
Cable: Sheathing made of polyurethane (PUR/UL94, V0, UV-resistant)
Operating elements
Operating elements Position of operating elements
Analog output: Zero point adjustment
P01-PMx13xxx-19-xx-xx-xx-003
The potentiometer for operating the
Cerabar T PMP131 and PMP135 with analog or
switch output is located below the base of the plug.
P01-PMx13xxx-19-xx-xx-xx-001
1 Potentiometer for zero point correction by ±5 % of URL
The zero point can be corrected for the Cerabar T
PMP131 and PMP135 with analog output and plug
version.
➪
1