Endress+Hauser Cerabar T PMC131 - Accessories; Welding Neck with Sealing Taper; Welding Neck with Sealing Surface; Plug-In Jack

Cerabar T
Endress+Hauser 23
Accessories
Welding neck with
sealing taper
Welding neck with
sealing surface
Plug-in jack
Plug-on display
PHX20/PHX21
• Welding neck for flush-mounted installation of the
process connection G1 A with metallic sealing
taper (PMP135, version M)
Material: AISI 316L (1.4435)
Order number: 52005087
• with inspection certificate 3.1
Order number: 52010171
P01-PMP135xx-00-xx-00-xx-002
• Pressure sensor dummy for welding the welding
neck without any problems with order number
52005087 or 52010171
Material: CuZn
Order number: 52005272
50
(2)
30
(1.2)
27.5
(1.1)
mm (inch)
• Welding neck for flush-mounted installation of the
process connection G1 A with sealing surface
(PMP135, version N)
Material: AISI 316L (1.4435)
Gasket (enclosed): silicone O-ring
Order number: 52001051
• Optional with inspection certificate 3.1
Order number: 52011896
P01-PMP13xxx-00-xx-00-xx-005
Ø60 –0.4
–0.02
(2.4 )
24.6
(1)
29.6
(1.2)
ø41 (1.6)
G1
ISO 228
mm (inch)
• Plug-in jack M 12x1, straight
Self-made connection to M 12x1 housing plug
Material: Handle body PA; Coupling nut CuZn,
nickel-plated, degree of protection (inserted): IP 67
Order number: 52006263
P01-PMP13xxx-00-xx-00-xx-003
• 4-digit red LED display for looping into 4 to 20 mA
circuit via elbow plug
DIN 43650, rotatable in 90° steps, programmable
via 2 keys
Display range: –1999 to +9999
Degree of protection: IP 65
Material: Housing Pa6 GF30, front screen PMMA
Voltage drop: ≤5 V (corresponds to max. 250 Ω
load)
Approval for PHX21: ATEX II 2G
Order number PHX20: 52022914
Order number PHX21: 52022915
P01-PHX2xxxx-06-xx-xx-xx-002
48
42
42
42 (1.7)
42 (1.7)
48 (1.9)