Endress+Hauser Ceraphant T PTC31 - PC-Based Operation and Configuration

Operation Ceraphant T PTC31, PTP31, PTP35
14 Endress+Hauser
5.2 Operation with personal computer
The device can be configured with the configuration software ReadWin® 2000 or FieldCare.
For the connection between the USB port of the computer and the device a configuration kit
(e.g. TXU10 or FXA291)) is necessary.
P01-PTx3xxxx-19-xx-xx-xx-004
Fig. 9: Operation with PC
➀ Personal computer with configuration software ReadWin 2000 or FieldCare
➁ Configuration kit (USB interface) TXU10-AA or FXA291 with USB connection
➂ Ceraphant T with communication jack
Fig. 10: Device configuration with ReadWin
USB
1
2
3