CM14 Wiring
13
4.2 Post-connection check
Device condition and specifications Notes
Are the device or cables damaged? Visual inspection
Electrical connection Notes
Does the supply voltage match the specifications on the nameplate? 24 to 230 V AC/DC
(–20 % / +10 %) 50/60 Hz
Are all of the terminals firmly engaged in their correct slots? Is the coding on the individual
terminals correct?
-
Are the mounted cables strain-relieved? -
Are the supply voltage and signal cables connected correctly? See connection diagram,
(® å 3, ä 12) and on the
housing.
To Next Page
Loading...
