Need help?Do you have a question about the Endress+Hauser cerabar S PMC Series and is the answer not in the manual?
General| Product Type | Pressure Transmitter |
|---|---|
| Material | Stainless Steel, Aluminum |
| Pressure Type | Gauge, Absolute |
| Accuracy | ±0.075% of span |
| Output Signal | 4 to 20 mA HART, PROFIBUS PA, FOUNDATION Fieldbus |
| Process Connection | Thread, Flange |
| Housing Material | Aluminum, Stainless steel |
| Process Temperature | -40°C to +150°C |
| Ambient Temperature | -40°C to +85°C |
| Communication | HART, PROFIBUS PA, FOUNDATION Fieldbus |
| Approvals | ATEX, IECEx, FM, CSA |
| Diaphragm Material | Stainless Steel, Hastelloy |
| Protection Class | IP67 |
| Power Supply | 10.5-45 V DC |
| Measuring Range | 0 to 400 bar |
To Next Page