Endress+Hauser cerabar S PMC Series - Mounting Accessories

Mounting with capillary
tubing
To protect from high temperatures, moisture or vibration, or where the mounting point is
not easily accessible, the housing of the Cerabar S can be mounted with capillary tubing
away from the measuring point.
A bracket for wall or pipe mounting is available.
2.3 Mounting accessories
Wall and pipe mounting
with accessories
0 - 10 bar
Mounting point away from the
measuring point
Measuring point:
• very moist
• hot
• strongly vibrating
• difficult to access
BA187Y14
0 - 10 bar
Ø 60.3
Ø 6
BA187Y15
183
81
A
118
70
111
/60,3
0 - 10 bar
PMC 731 A = 19 mm
PMP 731
Flush-mounted diaphragm
A = 14 mm
PMP 731
Internal diaphragm
A = 39 mm
BA187Y18
Figure 2.8
left:
• Mounted with bracket on
horizontal piping
right:
• Mounted with bracket on a wall
118
B
3
94
166
0 - 10 bar
BA187Y17
ø60,3
ø6
0 - 10 bar
BA187Y19
Figure 2.9
Mounted with bracket on vertical
piping
PMC 731 B = 19 mm
PMP 731
Flush-mounted diaphragm
B = 14 mm
PMP 731
Internal diaphragm
B = 39 mm
2 Installation Cerabar S
14 Endress+Hauser