Incoming acceptance and product identification Deltabar PMD78B HART
6 Endress+Hauser
3.6 Functional Safety SIL (optional)
The Functional Safety Manual must be strictly observed for devices that are used in functional
safety applications.
3.7 IT security
Endress+Hauser can only provide a warranty if the device is installed and used as described in
the Operating Instructions. The device is equipped with security mechanisms to protect it
against any inadvertent changes to the device settings. IT security measures in line with
operators' security standards and designed to provide additional protection for the device and
device data transfer must be implemented by the operators themselves.
3.8 Device-specific IT security
The device offers specific functions to support protective measures by the operator. These
functions can be configured by the user and guarantee greater in-operation safety if used
correctly. An overview of the most important functions is provided in the following section:
• Write protection via hardware write protection switch
• Access code to change user role (applies to operation via the display, Bluetooth or FieldCare,
DeviceCare and asset management tools (e.g. AMS, PDM)
4 Incoming acceptance and product identification
4.1 Incoming acceptance
A0016870
• Is the order code on the delivery note (1) identical to the order code on the product sticker
(2)?
• Are the goods undamaged?
• Do the data on the nameplate correspond to the order specifications and the delivery note?
• Is the documentation available?
• If required (see nameplate): are the Safety Instructions (XA) provided?
If you can answer "no" to any of these questions, please contact Endress+Hauser.
To Next Page
Loading...
Need help?
General
