Endress+Hauser Deltapilot M FMB50 - Page 42

Operation Cerabar M, Deltabar M, Deltapilot M / 4...20 mA HART
42 Endress+Hauser
!
Note!
For an overview of the entire operating menu:  ä 100 ff.
Direct access to parameters
The parameters can only be accessed directly via the "Expert" user role.
Expert Expert Contains all the parameters of the device (including those in one of the
submenus). The "Expert" submenu is structured by the function blocks of
the device. It thus contains the following submenus:
• System
Contains all the device parameters that neither affect measurement nor
integration into a distributed control system.
• Measurement
Contains all the parameters for configuring the measurement.
• Output
Contains all the parameters for configuring the current output.
• Communication
Contains all the parameters for configuring the HART interface.
• Application
Contains all the parameters for configuring the functions that go beyond
the actual measurement (e.g. totalizer).
• Diagnosis
Contains all the parameters that are needed to detect and analyze
operating errors.
User role Submenu Meaning/use
Parameter name Description
Direct access (119)
Entry
Menu path:
Expert  Direct access
Enter the direct access code to go directly to a parameter.
Options:
• Enter the desired parameter code.
Factory setting:
0
Note:
For direct access, it is not necessary to enter leading zeros.