Endress+Hauser Deltapilot M FMB51 - Add. Disp. Value; Display Mode; Language

Cerabar M, Deltabar M, Deltapilot M / 4...20 mA HART Appendix
Endress+Hauser 109
Expert È System È Instrument info
Expert È System È Display
Parameter name Description
Cust. tag number (254)
Entry
Enter device tag e.g. TAG number (max. 8 alphanumeric characters).
Factory setting:
no entry or as per order specifications
Device tag (022)
Entry
Enter device tag e.g. TAG number (max. 32 alphanumeric characters).
Factory setting:
no entry or as per order specifications
Serial number (096)
Display
Displays the serial number of the device (11 alphanumeric characters).
Firmware version (095)
Display
Displays the firmware version.
Ext. order code (097)
Display
Enter the extended order code.
Factory setting:
As per order specifications
Order identifier (098)
Entry
Enter the order identifier.
Factory setting:
As per order specifications
ENP version (099)
Display
Displays the ENP version
(ENP = electronic nameplate)
Electr. serial no. (121)
Display
Displays the serial number of the main electronics (11 alphanumeric characters).
Sensor serial no. (122)
Display
Displays the serial number of the sensor (11 alphanumeric characters).
Parameter name Description
Language (000)
Selection
Select the menu language for the local display.
Options:
• English
• Optionally one further language (as selected when ordering the device)
• One further language (language of the producing factory)
Factory setting:
English
Display mode (001)
Selection
Specify the contents for the first line of the local display in the measuring mode.
Options:
•Primary value (PV)
• External value
• All alternating
Factory setting:
Primary value (PV)
Add. disp. value (002)
Selection
Specify the contents for the second line of the local display in the measuring mode.
Options:
•No value
• Pressure
•Main value (%)
• Current
•Temperature
• Totalizer 1
• Totalizer 2
The options depend on the measuring mode chosen.
Factory setting:
No value