Endress+Hauser Deltapilot M FMB51 - Page 130

Appendix Cerabar M, Deltabar M, Deltapilot M / 4...20 mA HART
130 Endress+Hauser
Sim. tank cont. (116)
Entry
Enter the simulation value.
See also "Simulation mode".
Prerequisites:
• "Measuring mode" = Level, "Activate table" lin. mode and "Simulation mode" = Tank
content.
Sim. current (117)
Entry
Enter the simulation value.
See also "Simulation mode".
Prerequisite:
• "Simulation mode"= Current value
Factory setting:
Current value of the current
Sim. error no. (118)
Entry
Enter the diagnostic message number.
See also "Simulation mode".
Prerequisite:
• "Simulation mode"= Alarm/warning
Switch on value:
484 (simulation active)
Parameter name Description