Installation Deltapilot S FOUNDATION Fieldbus
4 Endress+Hauser
1.5 Safety icons
2 Installation
2.1 General installation instructions
#
Warning!
The seal is not allowed to press on the process isolating diaphragm as this could affect the
measurement result.
!
Note!
• If a heated Deltapilot S is cooled during the cleaning (e.g. by cold water), a vacuum develops
for a short time, whereby water can penetrate the sensor through the pressure compensation
(1). If this is the case, mount the sensor with the pressure compensation (1) pointing
downwards.
• Keep the pressure compensation and GORE-TEX
®
filter (1) free from contaminations.
• Do not use sharp or hard objects to handle or clean the process isolating diaphragm.
Symbol Meaning
#
Warning!
A warning highlights actions or procedures which, if not performed correctly, will lead to personal injury,
a safety hazard or destruction of the instrument.
"
Caution!
Caution highlights actions or procedures which, if not performed correctly, may lead to personal injury or
incorrect functioning of the instrument.
!
Note!
A note highlights actions or procedures which, if not performed correctly, may indirectly affect operation
or may lead to an instrument response which is not planned.
1
1
1
FIELD TERMINALS
FIELD TERMINALS
To Next Page
Loading...
