Commissioning Flowmeter Proline 200
34 Endress+Hauser
Device type ID 0x1038 Device type parameter
Diagnostics → Device information → Device type
Device revision 2 • On the transmitter nameplate
• Device revision parameter
Diagnostics → Device information → Device revision
DD Revision Information and files under:
• www.endress.com
• www.fieldbus.org
CFF revision
For an overview of the different firmware versions for the device
7.1.2 Operating tools
The suitable device description file for the individual operating tools is listed in the table
below, along with information on where the file can be acquired.
Operating tool via
FOUNDATION Fieldbus
Sources for obtaining device descriptions
FieldCare • www.endress.com → Download Area
• CD–ROM (contact Endress+Hauser)
• DVD (contact Endress+Hauser)
DeviceCare • www.endress.com → Download Area
• CD–ROM (contact Endress+Hauser)
• DVD (contact Endress+Hauser)
• Field Xpert SFX350
• Field Xpert SFX370
Use update function of handheld terminal
AMS Device Manager
(Emerson Process Management)
www.endress.com → Download Area
Field Communicator 475
(Emerson Process Management)
Use update function of handheld terminal
7.2 Cyclic data transmission
For detailed information on cyclic data transmission, see the Operating Instructions
8 Commissioning
8.1 Function check
Before commissioning the measuring device:
‣
Make sure that the post-installation and post-connection checks have been performed.
• "Post-installation check" checklist→ 12
• "Post-connection check" checklist → 27
To Next Page
Loading...
