Endress+Hauser Flowmeter Proline 200 User Manual

Products Solutions Services
Brief Operating Instructions
Flowmeter
Proline 200
FOUNDATION Fieldbus transmitter
with vortex flow sensor
These instructions are Brief Operating Instructions; they are
not a substitute for the Operating Instructions pertaining to
the device.
Brief Operating Instructions part 2 of 2: Transmitter
Contain information about the transmitter.
Brief Operating Instructions part 1 of 2: Sensor →  3
KA01327D/06/EN/02.18
71423497
2018-12-03

Endress+Hauser Flowmeter Proline 200 Specifications

General

Model	Proline 200
Ambient Temperature	-40°C to +60°C
Pressure Rating	Up to 40 bar
Output Signals	4-20 mA, pulse, frequency
Communication Protocols	HART
Operating Temperature	-40°C to +60°C
Protection Class	IP66/IP67
Housing Material	Aluminum or stainless steel
Approvals	ATEX, IECEx, NEPSI

Summary

Flowmeter Brief Operating Instructions

Part 1: Sensor

Details for the sensor component of the flowmeter.

Part 2: Transmitter

Details for the transmitter component of the flowmeter.

Additional Documentation

Links to further information and resources for the device.

Document Information

Symbols Used

Explains various symbols and their meanings used throughout the manual.

Basic Safety Instructions

Personnel & Designated Use

Requirements for personnel and correct application of the device.

Workplace & Operational Safety

Safety guidelines for working with and operating the device.

Product & IT Security

Information on product safety standards and device IT security measures.

Installation

Mounting the Transmitter

Procedures for mounting the transmitter unit of the device.

Housing & Display Turning

Instructions for rotating the transmitter housing and display module.

Post-Installation Check

Checklist for verifying correct installation of the device.

Electrical Connection

Connection Conditions & Cables

Requirements for connecting cables and electrical conditions.

Terminal Assignment & Grounding

Details on terminal connections and proper grounding procedures.

Supply & Preparation

Requirements for the supply unit and device preparation before connection.

Connecting the Measuring Device

Compact Version Connection

Step-by-step guide for connecting the compact version of the device.

Remote Version Connection

Step-by-step guide for connecting the remote version of the device.

Post-Connection Check

Checklist for verifying correct electrical connections.

Operation Options

Overview & Menu Structure

Overview of available operation methods and the structure of the operating menu.

Menu Access & Elements

How to access the operating menu and details on its elements.

System Integration

Device Description Files

Information on device description files for system integration.

Operating Tools & Data Transmission

Details on operating tools and cyclic data transmission.

Commissioning

Initial Checks & Setup

Pre-commissioning checks, device setup, and language settings.

Configuration & Security

Procedures for device configuration, tagging, and protecting settings.

Application-Specific Configuration

Configuration steps for specific applications like steam, liquid, and gas.

Diagnostic Information

Faults and Remedial Measures

How to interpret diagnostic messages and perform remedial actions.