Endress+Hauser Levelflex FMP55 - Page 26

Mounting Levelflex FMP55 HART
26 Endress+Hauser
Connecting the cable
Required tools:
Open-end wrench 18AF
A
B
6 Nm
(4.42 lbf ft)
6 Nm
(4.42 lbf ft)
6 Nm
(4.42 lbf ft)
C
C
6 Nm
(4.42 lbf ft)
r = 100 (4)
min
r = 100 (4)
min
A0014794
 6 Connecting the cable. There are the following possibilities:
A Angled plug at the probe
B Angled plug at the electronics housing
C Length of the remote cable as ordered