Levelflex FMP55 HART Mounting
Endress+Hauser 29
6.3 Post-installation check
m Is the device undamaged (visual inspection)?
m
Does the device conform to the measuring point specifications?
For example:
• Process temperature
• Process pressure (refer to the chapter on "Material load curves" of the "Technical Information"
document)
• Ambient temperature range
• Measuring range
m Are the measuring point identification and labeling correct (visual inspection)?
m Is the device adequately protected from precipitation and direct sunlight?
m Are the securing screw and securing clamp tightened securely?
To Next Page
Loading...
