Endress+Hauser Levelflex FMP55 - Post-connection Check

Levelflex FMP55 HART Electrical connection
Endress+Hauser 51
7.2.1 Pluggable spring-force terminals
Instruments without integrated overvoltage protection have pluggable spring-force terminals.
Rigid conductors or flexible conductors with cable sleeve can directly be inserted and are
contacted automatically.
To remove cables from the terminal: Press on the groove between the terminals using a flat-
tip screwdriver ≤ 3 mm (0.12 inch) while pulling the cables out of the terminals.
mm(in)
≤ 3(0.12)
A0013661