Liquiphant FTL31
Endress+Hauser 25
Certificates and approvals
The following documents are also available in the Download Area of the Endress+Hauser
website: www.endress.com → Download
CE mark
The measuring system is in conformity with the statutory requirements of the applicable EC
Directives. These are listed in the corresponding EC Declaration of Conformity along with the
standards applied. Endress+Hauser confirms successful testing of the device by affixing to it the CE
mark.
C-Tick symbol
The measuring system complies with EMC requirements of the "Australian Communications and
Media Authority (ACMA)".
Approval
CSA C/US General Purpose
Overfill prevention
Prior to mounting the device, pay attention to the WHG approval documents. The documents
can be found in the Download Area of the Endress+Hauser website.
WHG
• Overfill detection system: Z-65.11-531
• Leak detection system: Z-65.40-532
Marine approvals
• GL (German Lloyd)
• ABS (American Bureau of Shipping)
• LR (Lloyds Register)
• BV (Bureau Veritas)
• DNV (Det Norske Veritas)
CRN approval
Versions with a CRN approval (Canadian Registration Number) are listed in the corresponding
registration documents. CRN-approved devices are labeled with registration number 0F16950.5.
Inspection certificates
The following documents can be ordered with the device (optional):
• Acceptance test certificate as per EN 10204-3.1
• Final inspection report
Manufacturer declarations
The following documents can be ordered with the device (optional):
• FDA conformity
• TSE-free, materials free from animal origin
• ROHS-compliant in accordance with Endress+Hauser regulation
Pressure Equipment
Directive
The Liquiphant FTL31 does not fall within the scope of Pressure Equipment Directive 97/23/EC as it
does not have a pressurized housing as defined in Article 1, Section 2.1.4 of the directive.
Other standards and
guidelines
The applicable European guidelines and standards can be found in the relevant EU Declarations of
Conformity.
To Next Page
Loading...
