Endress+Hauser Liquiphant FTL31 - 6.2 Post-Connection Checks

Liquiphant FTL31
Endress+Hauser 27
Accessories
Weld-in adapter
Various weld-in adapters are available for installation in vessels or pipes.
The adapters are optionally available with inspection certificate 3.1 EN10204.
View (example) Description
1
A0023557
1 Leakage hole
G ¾" ø29 pipe installation
ø50 vessel installation
FDA-listed materials as per 21 CFR Part 175-178
G 1" ø53 pipe installation
ø60 vessel installation
If installed horizontally and weld-in adapters with a leakage hole are used, ensure that the leakage
hole is pointing down. This allows leaks to be detected as quickly as possible.
Detailed information can be found in TI00426F/00/EN "Weld-in adapter and flanges" and in
the supplementary documentation (→  29).
Plug-in jack, cable
The plug-in jacks listed are suitable for use in the temperature range
–25 to +70 °C (–13 to +158 °F).
Engineering unit mm (in)
Plug-in jack M12 IP67 Description Order number
27.5
(1.08)
40
(1.57)
³
A0022292
• elbowed 90°
• 5 m (16 ft) cable PVC (gray)
• Slotted nut Cu Sn/Ni
• Body: PUR (blue)
52010285
Plug-in jack M12 IP67 Description Order number
~52.5 (2.07)
ø20
(0.8)
A0022293
• Self-terminated connection to M12
connector
• Slotted nut Cu Sn/Ni
• Body: PBT
52006263
Wire colors for M12 connector: 1 = BN (brown), 2 = WT (white), 3 = BU (blue), 4 = BK (black)