Endress+Hauser Liquiphant FTL31 - 5.1.4 Buildup Optimization

Liquiphant FTL31
12 Endress+Hauser
Installation
Orientation
The point level switch can be installed in any position in a vessel, pipe or tank. Foam formation does
not affect the function.
1
2
2
3
A0023118
 2 Installation options
1 Overfill prevention or upper level detection
2 Lower level detection
3 Dry running protection for pump
Installation instructions Switch point
The switch point (A) on the sensor depends on the orientation of the point level switch (water
+25 °C (+77 °F), 1 bar (14.5 psi).
A
~30 (1.2)
A
A
~10.5(0.4)
~13 (0.5)
A0020734
 3 Vertical and horizontal orientation, dimensions in mm (in)