Micropilot FMR67B PROFINET with Ethernet-APL
14 Endress+Hauser
Mounting
Mounting location
A0016883
A Recommended distance from wall to nozzle outer edge ~ 1/6 of the vessel diameter. The device should never
be mounted closer than 20 cm (7.87 in) to the vessel wall.
1 Use of a weather protection cover; protection from direct sunlight or rain
2 Installation in the center, interference can cause signal loss
3 Do not install above the filling curtain
In applications with strong dust emissions, the integrated purge air connection can prevent the
antenna from becoming clogged.
To Next Page
Loading...
