Micropilot FMR67B PROFINET with Ethernet-APL
64 Endress+Hauser
Heartbeat Monitoring
Foam detection wizard and Build-up detection wizard are available, process windows can be
configured. Furthermore, additional monitoring parameters can be displayed and used for predictive
maintenance or application optimization.
"Foam detection" wizard
This wizard configures the automatic foam detection.
Foam detection can be linked to an output variable or status information e.g. to control a sprinkler
used to dissolve the foam. It is also possible to monitor the foam increase in a so called foam index.
The foam index can also be linked to an output variable and can be shown on the display.
Preparation:
The Foam monitoring initialization should only be done without or less foam.
Areas of application
• Measurement in liquids
• Reliable detection of foam on the medium
"Build-up detection" wizard
This wizard configures the build-up detection.
Basic idea:
The build-up detection can, for example, be linked to a compressed-air system to clean the antenna.
With the build-up monitoring the maintenance cycles can be optimized.
Preparation:
The build-up monitoring initialization should only be done without or less build-up.
Areas of application
• Measurement in liquids and solids
• Reliable detection of buildup on the antenna
Detailed description
Special Documentation SD03093F
Accessories
Weather protection cover
316L
The weather protection cover can be ordered together with the device via the "Accessory enclosed"
product structure.
It is used to protect against direct sunlight, precipitation and ice.
Weather protection cover 316L is suitable for the dual compartment housing made of aluminum or
316L. The delivery includes the holder for direct mounting on the housing.
To Next Page
Loading...
