Endress+Hauser Micropilot FMR67B - Page 67

Micropilot FMR67B PROFINET with Ethernet-APL
Endress+Hauser 67
Technical data
• Material: EPDM
• Recommended screw size: M18
• Recommended screw length: 110 mm (4.3 in)
• Process pressure: –0.1 to 0.1 bar (–1.45 to 1.45 psi)
• Process temperature: –40 to +80 °C (–40 to +176 °F)
Ordering information
• The flange seal can be ordered together with the device via the "Accessory enclosed" product
structure.
• Order number: 71074265
Seal, adjustable, ASME 3"/ JIS 80A
The seal, adjustable, ASME 3"/ JIS 80A is compatible with flanges ASME 3" 150 lbs and JIS 80A 10K
4°
ø133 (5.2)
ø89 (3.5)
±8°
14 (0.55)
22 (0.87)
30 (1.18)
A0046698
Technical data
• Material: EPDM
• Recommended screw size: M14
• Recommended screw length: 100 mm (3.9 in)
• Process pressure: –0.1 to 0.1 bar (–1.45 to 1.45 psi)
• Process temperature: –40 to +80 °C (–40 to +176 °F)
Ordering information
• The flange seal can be ordered together with the device via the "Accessory enclosed" product
structure.
• Order number: 71249070
Seal, adjustable, ASME 4"
The seal, adjustable, ASME 4" is compatible with flanges ASME 4" 150 lbs
4°
ø171 (6.7)
ø115 (4.53)
±8°
14 (0.55)
23.5 (0.93)
33 (1.3)
A0046699
Technical data
• Material: EPDM
• Recommended screw size: M14
• Recommended screw length: 100 mm (3.9 in)
• Process pressure: –0.1 to 0.1 bar (–1.45 to 1.45 psi)
• Process temperature: –40 to +80 °C (–40 to +176 °F)