Incoming acceptance and product identification Nivector FTI26
10 Endress+Hauser
A0035872
Do the data on the nameplates correspond to the order specifications on the delivery note?
If one of these conditions is not satisfied, contact your Sales Center.
4.2 Product identification
The measuring device can be identified in the following ways:
• Nameplate data
• Order code with breakdown of the device features on the delivery note
• Enter serial number from nameplates in W@M Device Viewer
(www.endress.com/deviceviewer): All information on the measuring device is displayed
The serial number on the nameplate can also be used to obtain an overview of the technical
documentation supplied with the device in W@MDevice Viewer
(www.endress.com/deviceviewer)
4.2.1 Manufacturer address
Endress+Hauser SE+Co. KG
Hauptstraße 1
79689 Maulburg, Germany
Address of the manufacturing plant: See nameplate.
To Next Page
Loading...
Need help?
General
