Endress+Hauser Nivector FTI26 - Adapter

Nivector FTI26 Accessories
Endress+Hauser 23
11.1 Adapter
• For hygiene sector and hazardous areas
• Material: 316L (1.4404), seal: VMQ
• Weight
• Weld-in adapter with threaded sleeve: 466 g (16.44 oz)
• Tri-Clamp 2'' with threaded sleeve: 503 g (17.74 oz)
• Order number
• Weld-in adapter G 1", threaded sleeve, molded seal: 71444432
• Process adapter G 1" Tri-Clamp 2'' , threaded sleeve, molded seal: 71444431
1
2
3
4
A0040366
1 Threaded sleeve
2 Molded seal
3 Weld-in adapter G 1", order code 620, option PK
4 Process adapter G 1" Tri-Clamp 2", order code 620, option RK
58.6 (2.31)
Ø60 (2.36)
Ø44.9 (1.77)
Ø60 (2.36)
A0040367
 12 Weld-in adapter G 1" with threaded sleeve. Unit of measurement mm (in)
58.6 (2.31)
Ø64 (2.52)
Ø44.9 (1.77)
Ø48.3 (1.9)
A0036229
 13 Process adapter G 1" Tri-Clamp 2" with threaded sleeve. Unit of measurement mm (in)