Nivector FTI26 About this document
Endress+Hauser 5
Symbol Meaning
Result of a step
Visual inspection
1.5 Symbols for graphics
Symbol Meaning
1, 2, 3 ... Item numbers
A, B, C, ... Views
1.6 Documentation
For an overview of the scope of the associated Technical Documentation, refer to the
following:
• W@M Device Viewer (www.endress.com/deviceviewer): Enter the serial number
from nameplate
• Endress+Hauser Operations App: Enter the serial number from the nameplate or
scan the 2D matrix code (QR code) on the nameplate
1.7 Standard documentation
• TI01384F → Nivector FTI26, IO-Link
• BA01830F → Nivector FTI26 without IO-Link
• BA01832F → Nivector FTI26, IO-Link
• KA01408F → Nivector FTI26
1.8 Supplementary documentation
• TI00426F/00 → Weld-in adapter, process adapter and flanges (overview)
• SD01622P/00 → Weld-in adapter (installation instructions)
• SD00356F/00 → Valve plug (installation instructions)
• SD02242F/00 → Protector (installation instructions)
1.9 Certificates
Depending on the option selected in the "Approval" order code, Safety Instructions are
supplied with the device, e. g. XA. This documentation is an integral part of the Operating
Instructions. The nameplate indicates the Safety Instructions (XA) that are relevant to the
device.
Safety instructions
• XA01734F/00 → ATEX; IECEx
• XA01821F/00 → CSA Ex
• XA01943F/00 → EAC Ex
To Next Page
Loading...
Need help?
General
