Nivector FTI26 Incoming acceptance and product identification
Endress+Hauser 9
4 Incoming acceptance and product
identification
4.1 Incoming acceptance
A0016051
Is the order code on the delivery note (1) identical to the order code on the product sticker (2)?
Are the goods undamaged?
A0035872
Do the data on the nameplates correspond to the order specifications on the delivery note?
If one of these conditions is not satisfied, contact your Sales Center.
4.2 Product identification
The measuring device can be identified in the following ways:
• Nameplate data
• Order code with breakdown of the device features on the delivery note
• Enter serial number from nameplates in W@M Device Viewer
(www.endress.com/deviceviewer): All information on the measuring device is displayed
The serial number on the nameplate can also be used to obtain an overview of the
technical documentation supplied with the device in W@MDevice Viewer
(www.endress.com/deviceviewer)
4.2.1 Manufacturer address
Endress+Hauser SE+Co. KG
Hauptstraße 1
79689 Maulburg, Germany
Address of the manufacturing plant: See nameplate.
To Next Page
Loading...
Need help?
General
