Endress+Hauser NRF81 - Page 130

Operating menu Tankside Monitor NRF81
130 Endress+Hauser
Factory setting No value
Additional information
Read access Operator
Write access Maintenance
Output vapor temperature 
Navigation  Setup → Advanced setup → Input/output → HART devices → HART Device(s)
→ Output vapor temperature
Prerequisite Not available for Micropilot S FMR5xx and Prothermo 53x. (In these cases the measured
variables are allocated automatically).
Description Defines which HART variable is the vapor temperature.
Selection • No value
• Primary variable (PV)
• Secondary variable (SV)
• Tertiary variable (TV)
• Quaternary variable (QV)
Factory setting No value
Additional information
Read access Operator
Write access Maintenance
Output level 
Navigation  Setup → Advanced setup → Input/output → HART devices → HART Device(s)
→ Output level
Prerequisite Not available for Micropilot S FMR5xx and Prothermo 53x. (In these cases the measured
variables are allocated automatically).
Description Defines which HART variable is the level.
Selection • No value
• Primary variable (PV)
• Secondary variable (SV)
• Tertiary variable (TV)
• Quaternary variable (QV)
Factory setting No value
Additional information
Read access Operator
Write access Maintenance