Endress+Hauser NRF81 - Setup Menu: Communication Interface Configuration

Tankside Monitor NRF81 Operating menu
Endress+Hauser 153
"Communication" submenu
This menu contains a submenu for each digital communication interface of the device. The
communication interfaces are designated by "X1-4" where "X" specifies the slot in the
terminal compartmen and "1-4" the terminals within this slot.
D
E
F
C
B
A
1
1
1
1 3
2
2 4
1
HR
CDI
WP
on
SIM
2
2
3
3
4
4
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
POWER
A
1 2 3 4
A1-4
i
D
1
2 3 4
D1-4
A0031200
 49 Designation of the "Modbus" or "V1" modules (examples); depending on the device version these modules
may also be in slot B or C.
Navigation  Setup → Advanced setup → Communication
"Modbus X1-4" or "V1 X1-4" submenu
This submenu is only present for devices with MODBUS and/or V1 communication
interface. There is one submenu of this type for each communication interface.
Navigation  Setup → Advanced setup → Communication → Modbus X1-4 /
V1 X1-4
Communication interface protocol
Navigation  Setup → Advanced setup → Communication → Modbus X1-4 / V1 X1-4
→ Communication interface protocol
Description Shows the type of communication protocol.
Additional information
Read access Operator
Write access -