Endress+Hauser NRF81 - Page 162

Operating menu Tankside Monitor NRF81
162 Endress+Hauser
"HART output" submenu
Navigation  Setup → Advanced setup → Communication → HART output
"Configuration" submenu
Navigation  Setup → Advanced setup → Communication → HART output
→ Configuration
System polling address 
Navigation  Setup → Advanced setup → Communication → HART output → Configuration
→ System polling address
Description Device address for HART communication.
User entry 0 to 63
Factory setting 15
Additional information
Read access Operator
Write access Maintenance
No. of preambles 
Navigation  Setup → Advanced setup → Communication → HART output → Configuration → No.
of preambles
Description Defines the number o preambles in the HART telegram.
User entry 5 to 20
Factory setting 5
Additional information
Read access Operator
Write access Maintenance
PV source 
Navigation  Setup → Advanced setup → Communication → HART output → Configuration → PV
source
Description Decides, if the PV configuration is according to an analog output (HART slave) or
customized (in case of HART tunneling only).