Operating menu Tankside Monitor NRF81
208 Endress+Hauser
Safety distance
Navigation Setup → Advanced setup → Application → Tank calculation → HTG → Safety distance
Description Defines the minimum level which must be present above the bottom and middle pressure
sensor before their signal is used for the calculation.
User entry 0 to 10 000 mm
Factory setting 2 000 mm
Additional information
Read access Operator
Write access Maintenance
Hysteresis
Navigation Setup → Advanced setup → Application → Tank calculation → HTG → Hysteresis
Description Defines the hysteresis for the HTG calculation. Prevents constant switching if the level is
near the switch-over point.
User entry 0 to 2 000 mm
Factory setting 50 mm
Additional information
Read access Operator
Write access Maintenance
To Next Page
Loading...
