Endress+Hauser NRF81 - Page 218

Operating menu Tankside Monitor NRF81
218 Endress+Hauser
Alarm value
Navigation  Setup → Advanced setup → Application → Alarm → Alarm → Alarm value
Prerequisite Alarm mode (→  215) ≠ Off
Description Shows the current value of the process variable being monitored.
User interface Signed floating-point number
Factory setting 0 None
Additional information
Read access Operator
Write access -
HH alarm value 
Navigation  Setup → Advanced setup → Application → Alarm → Alarm → HH alarm value
Prerequisite Alarm mode (→  215) ≠ Off
Description Defines the high-high(HH) limit value.
User entry Signed floating-point number
Factory setting 0 None
Additional information
Read access Operator
Write access Maintenance
H alarm value 
Navigation  Setup → Advanced setup → Application → Alarm → Alarm → H alarm value
Prerequisite Alarm mode (→  215) ≠ Off
Description Defines the high(H) limit value.
User entry Signed floating-point number
Factory setting 0 None
Additional information
Read access Operator
Write access Maintenance