Tankside Monitor NRF81 Operating menu
Endress+Hauser 245
Description Switches the simulation of the current on or off.
Selection • Off
• On
Factory setting Off
Additional information
Read access Operator
Write access Maintenance
Simulation value
Navigation Diagnostics → Simulation → Simulation value
Diagnostics → Simulation → Simulation value
Prerequisite Current output simulation (→ 244) = On
Description Defines the current to be simulated.
User entry 3.4 to 23 mA
Factory setting The current at the time the simulation was started.
Additional information
Read access Operator
Write access Maintenance
To Next Page
Loading...
