Tankside Monitor NRF81 Operability
Endress+Hauser 51
7.5.2 Establishing the connection between FieldCare and the device
1. Make sure the HART CommDTM NXA is installed and update the DTM catalogue if
required.
2. Create a new project in FieldCare.
3.
A0028515
Add a new device: NXA HART Communication
4.
A0028516
Open the configuration of the DTM and enter the required data (IP address of the
NXA820; "Password" = "hart"; "Tank identification" only with NXA V1.05 or higher)
To Next Page
Loading...
