Endress+Hauser NRF81 - Page 52

Operability Tankside Monitor NRF81
52 Endress+Hauser
5.
A0028517
Select Create network from the context menu.
 The device is detected and the DTM is assigned.
6.
A0032934
 The device can be configured.
The "Save/Restore" function
After a device configuration has been saved to a computer and restored to the device
using the Save/Restore function of FieldCare, the device must be restarted by the
following setting:
Setup → Advanced setup → Administration → Device reset = Restart device.
This ensures correct operation of the device after the restore.