Tankside Monitor NRF81 Commissioning
Endress+Hauser 65
This parameter determines how the state of the external switch is mapped to the internal
states of the DIO module:
State of the external switch Internal state of the DIO module
Contact type = Normally open Contact type = Normally closed
Open Inactive Active
Closed Active Inactive
Behavior in special situaions:
During start-up Unknown Unknown
Fault in measurement Error Error
• The internal state of the Digital Input can be transferred to a Digital Output or can
be used to control the measurement.
• The Digital Xx-x submenu contains additional parameters for a more detailed
configuration of the Digital Input. For a description refer to → 148.
To Next Page
Loading...
