Endress+Hauser Proline Promag 50P - Process Conditions and Temperature Limits; Medium Temperature Range

Proline Promag 50P, 53P
20 Endress+Hauser
Degree of protection • Standard: NEMA 4X (IP 67) for transmitter and sensor
• Optional: NEMA 6P (IP 68) for sensor in remote version
Shock and vibration resistance Acceleration up to 2 g by analogy with IEC 60068-2-6
(high-temperature version: no data available)
Electromagnetic compatibility
(EMC)
To EN 61326/A1 and NAMUR recommendation NE 21
Process conditions
Medium temperature range The permissible medium temperature depends on the measuring-tube lining:
• -40 to +265°F (−40 to +130°C) for PTFE (1/2" to 24" / DN 15 to 600), for restrictions → refer to
diagrams
• -4 to + 355°F (−20 to +180°C for PFA (1" to 8" / DN 25 to 200), for restrictions → refer to diagrams
Compact version (PFA and PTFE lining)
T
A
= ambient temperature, T
F
= fluid temperature, HT = high-temperature version, with insulation
m = temperature range from 14 to -40°F (-10°C to -40°C) only applies for flanges made of stainless steel
A0002660
Remote version (PFA and PTFE lining)
T
A
= ambient temperature, T
F
= fluid temperature, HT = high-temperature version, with insulation
m = temperature range from 14 to -40°F (-10°C to -40°C) only applies for flanges made of stainless steel
A0002671
32
(0)
32 (0)
-4
(-20)
-40
(-40)
68
(20)
68 (20)
104 (40)
140 (60)
T
A
[°C]
[°C]
°F
°F
104
(40)
140
(60)
176
(80)
T
F
212
(100)
248
(120)
284
(140)
320
(160)
356
(180)
PTFE
PFA
-4 (-20)
-40 (-40)
HT
m
PTFE
PFA
m
HT
32
(0)
32 (0)
-4
(-20)
-40
(-40)
68
(20)
68 (20)
104 (40)
140 (60)
T
A
[°C]
[°C]
°F
°F
104
(40)
140
(60)
176
(80)
T
F
212
(100)
248
(120)
284
(140)
320
(160)
356
(180)
-4 (-20)
-40 (-40)