Endress+Hauser Proline Promag 300 User Manual

Products Solutions Services
Description of Device Parameters
Proline Promag 300
Modbus RS485
Electromagnetic flowmeter
Menu/Variable
Proline Device
Access status tooling:
Operation
Setup
Diagnostics
Locking status:
Access status tooling:
Enter access code:
System
Sensor
Input
Output
Communication
Application
Diagnostics
P
P
P
P
Expert
GP01053D/06/EN/02.17
71376176
Valid as of version
01.01.zz (Device firmware)

Endress+Hauser Proline Promag 300 Specifications

General

Measurement Principle	Electromagnetic
Device Type	Electromagnetic Flowmeter
Housing Material	Aluminum, stainless steel
Pressure Rating	Max. 40 bar (580 psi)
Output Signal	4 to 20 mA
Communication Protocols	HART, PROFIBUS DP/PA, FOUNDATION Fieldbus
Degree of Protection	IP67
Lining	PTFE, PFA, Polyurethane
Electrode Material	Stainless steel, Hastelloy C, tantalum, platinum-iridium

Summary

1 About this document

1.1 Document function

Explains the purpose and use of the document for understanding device parameters.

2 Overview of the Expert operating menu

3 Description of device parameters

3.1 "System" submenu

Details parameters related to the device's system configuration.

3.2 "Sensor" submenu

Explains parameters specific to the sensor module and its measurements.

3.3 "I/O configuration" submenu

3.4 "Input" submenu

3.5 "Output" submenu

3.6 "Communication" submenu

Covers settings for device communication interfaces like Modbus and WLAN.

3.7 "Application" submenu

3.8 "Diagnostics" submenu

Provides information on device diagnostics, events, and information logs.

6 Modbus RS485 Register Information

6.2 Overview of the Expert operating menu

6.3 Register information