Endress+Hauser Proline Promag 300 - 3.1 System submenu

Description of device parameters Proline Promag 300 Modbus RS485
14 Endress+Hauser
3.1 "System" submenu
Navigation  Expert → System
‣
System
‣
Display
→  14
‣
Config. backup
→  28
‣
Diagn. handling
→  31
‣
Administration
→  39
3.1.1 "Display" submenu
Navigation  Expert → System → Display
‣
Display
Display language (0104)
→  15
Format display (0098)
→  16
Value 1 display (0107)
→  18
0% bargraph 1 (0123)
→  18
100% bargraph 1 (0125)
→  19
Decimal places 1 (0095)
→  19
Value 2 display (0108)
→  20
Decimal places 2 (0117)
→  21
Value 3 display (0110)
→  21
0% bargraph 3 (0124)
→  22
100% bargraph 3 (0126)
→  22
Decimal places 3 (0118)
→  23
Value 4 display (0109)
→  23
Decimal places 4 (0119)
→  24