Endress+Hauser Proline Promag 300 - Login Page; Webserver Funct.; WLAN Settings Submenu

Proline Promag 300 Modbus RS485 Description of device parameters
Endress+Hauser 159
Webserver funct. 
Navigation  Expert → Communication → Web server → Webserver funct. (7222)
Description Use this function to switch the Web server on and off.
Selection • Off
• On
Factory setting On
Additional information Description
Once disabled, the Webserver funct. can only be re-enabled via or the operating tool
FieldCare.
Selection
Option Description
Off • The web server is completely disabled.
• Port 80 is locked.
On • The complete functionality of the web server is available.
• JavaScript is used.
• The password is transferred in an encrypted state.
• Any change to the password is also transferred in an encrypted state.
Login page 
Navigation  Expert → Communication → Web server → Login page (7273)
Description Use this function to select the format of the login page.
Selection • Without header
• With header
Factory setting With header
3.6.5 "WLAN settings" submenu
Navigation  Expert → Communication → WLAN settings
‣
WLAN settings
WLAN (2702)
→  160
WLAN mode (2717)
→  161