Endress+Hauser Proline Promag 300 - Temperature Unit; Mass Flow Unit

Description of device parameters Proline Promag 300 Modbus RS485
58 Endress+Hauser
Additional information Effect
The selected unit applies for:
• Conductivity parameter (→  46)
• CorrConductivity parameter (→  47)
Selection
For an explanation of the abbreviated units: →  217
Temperature unit 
Navigation  Expert → Sensor → System units → Temperature unit (0557)
Description Use this function to select the unit for the temperature.
Selection
SI units
• °C
• K
US units
• °F
• °R
Factory setting Country-specific:
• °C
• °F
Additional information Result
The selected unit applies for:
• Temperature parameter (→  47)
• Maximum value parameter (→  200)
• Minimum value parameter (→  199)
• External temp. parameter (→  84)
• Maximum value parameter (→  201)
• Minimum value parameter (→  200)
Selection
For an explanation of the abbreviated units: →  217
Mass flow unit 
Navigation  Expert → Sensor → System units → Mass flow unit (0554)
Description Use this function to select the unit for the mass flow.