Endress+Hauser Proline Promag 300 - Baudrate; Data Trans. Mode; Parity

Proline Promag 300 Modbus RS485 Description of device parameters
Endress+Hauser 151
Baudrate 
Navigation  Expert → Communication → Modbus config. → Baudrate (7111)
Description Use this function to select a transmission rate.
Selection • 1200 BAUD
• 2400 BAUD
• 4800 BAUD
• 9600 BAUD
• 19200 BAUD
• 38400 BAUD
• 57600 BAUD
• 115200 BAUD
Factory setting 19200 BAUD
Data trans. mode 
Navigation  Expert → Communication → Modbus config. → Data trans. mode (7115)
Description Use this function to select the data transmission mode.
Selection • ASCII
• RTU
Factory setting RTU
Additional information Options
• ASCII
Transmission of data in the form of readable ASCII characters. Error protection via LRC.
• RTU
Transmission of data in binary form. Error protection via CRC16.
Parity 
Navigation  Expert → Communication → Modbus config. → Parity (7122)
Description Use this function to select the parity bit.
Selection • Odd
• Even
• None/1 stop bit
• None/2 stop bits
Factory setting Even