Endress+Hauser Proline Promag 300 - Switch Status; Switch Cycles; Max. Cycles No.

Description of device parameters Proline Promag 300 Modbus RS485
54 Endress+Hauser
Switch status
Navigation  Expert → Sensor → Measured val. → Output values → Relay output 1 to n → Switch
status (0801–1 to n)
Description Displays the current status of the relay output.
User interface • Open
• Closed
Additional information User interface
• Open
The relay output is not conductive.
• Closed
The relay output is conductive.
Switch cycles
Navigation  Expert → Sensor → Measured val. → Output values → Relay output 1 to n → Switch
cycles (0815–1 to n)
Description Displays all the switch cycles performed.
User interface Positive integer
Max. cycles no.
Navigation  Expert → Sensor → Measured val. → Output values → Relay output 1 to n → Max.
cycles no. (0817–1 to n)
Description Displays the maximum number of guaranteed switch cycles.
User interface Positive integer
"Double pulse output" submenu
Navigation  Expert → Sensor → Measured val. → Output values → Double
pulse out
‣
Double pulse out
Pulse output (0987)
→  55