Endress+Hauser Proline Promag 300 - Date;Time Format

Description of device parameters Proline Promag 300 Modbus RS485
62 Endress+Hauser
Date/time format 
Navigation  Expert → Sensor → System units → Date/time format (2812)
Description Use this function to select the desired time format for calibration history.
Selection • dd.mm.yy hh:mm
• dd.mm.yy am/pm
• mm/dd/yy hh:mm
• mm/dd/yy am/pm
Factory setting dd.mm.yy hh:mm
Additional information Selection
For an explanation of the abbreviated units: →  217
"User-spec. units" submenu
Navigation  Expert → Sensor → System units → User-spec. units
‣
User-spec. units
Volume text (0567)
→  63
Volume offset (0569)
→  64
Volume factor (0568)
→  64
Mass text (0560)
→  64
Mass offset (0562)
→  65
Mass factor (0561)
→  65
Corr. vol. text (0592)
→  65
Corr vol. offset (0602)
→  66
Cor.vol. factor (0590)
→  66
Density text (0570)
→  66
Density offset (0571)
→  67
Density factor (0572)
→  67