Endress+Hauser Proline Promag 300 - Diagnostic No. 531 (Empty Pipe Det.); Diagnostic No. 543 (Double Pulse Out)

Description of device parameters Proline Promag 300 Modbus RS485
36 Endress+Hauser
Selection • Off
• Alarm
• Warning
• Logbook only
Factory setting Warning
Additional information For a detailed description of the options available, see →  32
Diagnostic no. 531 (Empty pipe det.) 
Navigation  Expert → System → Diagn. handling → Diagn. behavior → Diagnostic no. 531 (0741)
Description Use this function to change the diagnostic behavior of the diagnostic message 531 Empty
pipe det..
Selection • Off
• Alarm
• Warning
• Logbook only
Factory setting Warning
Additional information
For a detailed description of the options available, see →  32
Diagnostic no. 543 (Double pulse out) 
Navigation  Expert → System → Diagn. handling → Diagn. behavior → Diagnostic no. 543 (0643)
Description Use this function to change the diagnostic behavior of the diagnostic message 543 Double
pulse out.
Selection • Off
• Alarm
• Warning
• Logbook only
Factory setting Warning
Additional information For a detailed description of the options available, see →  32