Endress+Hauser Proline Promag 300 - Display Channel 1; Display Channel 2

Proline Promag 300 Modbus RS485 Description of device parameters
Endress+Hauser 197
Display channel 1
Navigation  Expert → Diagnostics → Data logging → Displ.channel 1
Prerequisite The Extended HistoROM application package is available.
The software options currently enabled are displayed in the SW option overv.
parameter (→  43).
One of the following options is selected in the Assign chan. 1 parameter (→  192):
• Conductivity
*
• CorrConductivity
*
• Temperature
*
Description Displays the measured value trend for the logging channel in the form of a chart.
Additional information Description
0
/ ../XXXXXXXX
175.77
40.69 l/h
-100s
A0034352
 10 Chart of a measured value trend
• x-axis: depending on the number of channels selected displays 250 to 1000 measured
values of a process variable.
• y-axis: displays the approximate measured value span and constantly adapts this to the
ongoing measurement.
"Displ.channel 2" submenu
Navigation  Expert → Diagnostics → Data logging → Displ.channel 2
▸ Displ.channel 2
Display channel 2
→  197
Display channel 2
Navigation  Expert → Diagnostics → Data logging → Displ.channel 2
Prerequisite A process variable is defined in the Assign chan. 2 parameter.
* Visibility depends on order options or device settings