Endress+Hauser Proline Promag 300 - Energy Offset; Energy Factor (0586); Pressure Text (0581)

Proline Promag 300 Modbus RS485 Description of device parameters
Endress+Hauser 69
Additional information Result
The defined unit is shown as an option in the choose list of the following parameters:
• Energy unit parameter
• Energy flow unit parameter
Example
If the text W is entered, the choose list of the Energy flow unit parameter shows the
following options:
• W/s
• W/min
• W/h
• W/d
Energy offset 
Navigation  Expert → Sensor → System units → User-spec. units → Energy offset (0599)
Description Use this function to enter the offset for adapting the user-specific energy unit (without
time).
User entry Signed floating-point number
Factory setting 0
Energy factor 
Navigation  Expert → Sensor → System units → User-spec. units → Energy factor (0586)
Description Use this function to enter a quantity factor for the user-specific energy unit.
User entry Signed floating-point number
Factory setting 1.0
Pressure text 
Navigation  Expert → Sensor → System units → User-spec. units → Pressure text (0581)
Description Use this function to enter a text for the user-specific pressure unit.
User entry Max. 10 characters such as letters, numbers or special characters (@, %, /)
Factory setting User pres.