Endress+Hauser Proline Promag 300 - Actual Diagnos.

Description of device parameters Proline Promag 300 Modbus RS485
172 Endress+Hauser
‣
Mainboard module
→  185
‣
Sens. electronic
→  186
‣
I/O module 1
→  187
‣
I/O module 2
→  187
‣
I/O module 3
→  189
‣
Display module
→  190
‣
Min/max val.
→  199
‣
Data logging
→  191
‣
Heartbeat
→  201
‣
Simulation
→  201
Actual diagnos.
Navigation  Expert → Diagnostics → Actual diagnos. (0691)
Prerequisite A diagnostic event has occurred.
Description Displays the current diagnostic message. If two or more messages occur simultaneously,
the message with the highest priority is shown on the display.
User interface Symbol for diagnostic behavior, diagnostic code and short message.
Additional information Display
Additional pending diagnostic messages can be viewed in the Diagnostic list
submenu (→  174).
Via the local display: the time stamp and corrective measures referring to the cause of
the diagnostic message can be accessed via the  key.
Example
For the display format:
F271 Main electronics