Endress+Hauser Proline Promag 300 - 3.4 Input submenu

Proline Promag 300 Modbus RS485 Description of device parameters
Endress+Hauser 99
3.4 "Input" submenu
Navigation  Expert → Input
‣
Input
‣
Current input 1 to n
→  99
‣
Status input 1 to n
→  102
3.4.1 "Current input 1 to n" submenu
Navigation  Expert → Input → Current input 1 to n
‣
Current input 1 to n
Terminal no. (1611–1 to n)
→  99
Signal mode (1610–1 to n)
→  100
Current span (1605–1 to n)
→  100
0/4 mA value (1606–1 to n)
→  100
20 mA value (1607–1 to n)
→  101
Failure mode (1601–1 to n)
→  101
Failure value (1602–1 to n)
→  102
Terminal no.
Navigation  Expert → Input → Current input 1 to n → Terminal no. (1611–1 to n)
Description Displays the terminal numbers used by the current input module.
User interface • Not used
• 24-25 (I/O 2)
• 22-23 (I/O 3)
Additional information "Not used" option
The current input module does not use any terminal numbers.