Endress+Hauser Proline Promag 300 - Assign SSID Name; WLAN Channel

Description of device parameters Proline Promag 300 Modbus RS485
164 Endress+Hauser
Assign SSID name 
Navigation  Expert → Communication → WLAN settings → Assign SSID name (2708)
Description Use this function to select which name is used for the SSID
8)
.
Selection • Device tag
• User-defined
Factory setting User-defined
Additional information Selection
• Device tag
The device tag name is used as the SSID.
• User-defined
A user-defined name is used as the SSID.
SSID name 
Navigation  Expert → Communication → WLAN settings → SSID name (2707)
Prerequisite • The User-defined option is selected in the Assign SSID name parameter (→  164).
• The Access point option is selected in the WLAN mode parameter (→  161).
Description Use this function to enter a user-defined SSID name.
User entry Max. 32-digit character string comprising numbers, letters and special characters
Factory setting EH_device designation_last 7 digits of the serial number (e.g.
EH_Promag_300_A802000)
WLAN channel 
Navigation  Expert → Communication → WLAN settings → WLAN channel (2704)
Description Use this function to enter the WLAN channel.
User entry 1 to 11
Factory setting 6
Additional information Description
• It is only necessary to enter a WLAN channel if multiple WLAN devices are in use.
• If just one measuring device is in use, it is recommended to keep the factory setting.
8) Service Set Identifier